Home › Engine / Hybrid System › 1KD-FTV INTAKE / EXHAUST › INTERCOOLER
RM33J0E _51 Engine / Hybrid System _038432 1KD-FTV INTAKE / EXHAUST _0198030 INTERCOOLER A

1KD-FTV INTAKE / EXHAUST  INTERCOOLER  INSTALLATION  


PROCEDURE

Hide 17940D 1.INSTALL INTERCOOLER ASSEMBLY

a.

Install a new gasket and the intake air connector to the intercooler assembly with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.
A110367N01
1,0.125 1.156,0.302 0.156,0.177 10 true B 2.073,0.448 2.219,0.625 0.146,0.177 10 true B 0.188,0.938 0.333,1.115 0.146,0.177 10 false B 1.063,1.76 1.208,1.938 0.146,0.177 10 true A

Install the intercooler assembly with the 4 bolts.

Torque:
for bolt A : 32 N*m (326 kgf*cm, 24 ft.*lbf)
for bolt B : 12 N*m (122 kgf*cm, 9 ft.*lbf)


c.

Install a new No. 2 air hose and then tighten the 2 hose clamps.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


d.

Tighten the 2 hose clamps of the No. 1 air hose.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 89424A 2.INSTALL INTAKE AIR TEMPERATURE SENSOR

Hide 89421C 3.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

Hide 12601B 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Install the No. 1 engine cover sub-assembly with the 3 bolts and 2 cap nuts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)