Home › Engine / Hybrid System › 2GD-FTV FUEL › FUEL SUPPLY PUMP
RM33J0E _51 Engine / Hybrid System _038439 2GD-FTV FUEL _0199080 FUEL SUPPLY PUMP G

2GD-FTV FUEL  FUEL SUPPLY PUMP  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT SUPPLY PUMP ASSEMBLY

a.

Inspect the pre-stroke control valve assembly.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.42 to 0.52 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the pre-stroke control valve.


If the result is not as specified, replace the supply pump assembly.