Home › Drivetrain › AXLE AND DIFFERENTIAL › AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR
RM33J0E _52 Drivetrain _038472 AXLE AND DIFFERENTIAL _0199121 AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR A

AXLE AND DIFFERENTIAL  AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR  INSTALLATION  


PROCEDURE

Hide 41400 1.INSTALL DIFFERENTIAL VACUUM ACTUATOR ASSEMBLY

a.
C237514C01
1.073,0.625 1.521,0.26 1.521,0.26 1.938,0.26 true 2.021,0.177 2.333,0.375 0.313,0.198 10 false *a
*a Seal Packing


Remove any seal packing material from the contact surface of the differential and clutch case.

NOTICE:

Do not drop oil on the contact surfaces.



b.

Clean residual seal packing material from the contact surfaces using gasoline or alcohol.


c.

Apply seal packing to the differential tube as shown.

Seal packing:

Toyota Genuine seal packing 1281, Three Bond 1281 or equivalent


HINT:

Install the actuator within 3 minutes after applying seal packing.



d.

Clean the threads of the 4 bolts and retainer bolt holes with toluene or trichloroethylene.


e.
C327528

Install the differential motor actuator assembly to the differential tube.


f.

Install the 4 bolts.

Torque:
20.6 N*m (210 kgf*cm, 15 ft.*lbf)


g.

Install the 2 front mounting bolts and 2 nuts.

Torque:
105 N*m (1071 kgf*cm, 77 ft.*lbf)


h.

Install the front No. 1 differential mounting nut.

Torque:
93.5 N*m (953 kgf*cm, 69 ft.*lbf)


i.

Lower the jack.


j.
C323256

Install the bracket with the bolt.

Torque:
18.55 N*m (189 kgf*cm, 14 ft.*lbf)


k.

Connect the differential motor actuator connector.


l.
C323255

Install the bracket with the bolt.

Torque:
18.55 N*m (189 kgf*cm, 14 ft.*lbf)


m.

Connect the differential oil temperature sensor connector.


n.
C323254

Connect the differential breather hose to the front differential union.


o.
C323253

Install the differential breather tube bracket with the bolt.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


p.
C330144

Connect the breather hose to the differential breather tube bracket.


Hide 51442 3.INSTALL NO. 2 ENGINE UNDER COVER

Hide 51441 4.INSTALL NO. 1 ENGINE UNDER COVER