Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR(w/ VSC)
RM33J0E _54 Brake _038477 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0199125 BRAKE ACTUATOR(w/ VSC) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(w/ VSC)  REASSEMBLY  


PROCEDURE

Hide 44546A 1.INSTALL BRAKE ACTUATOR BOLT CUSHION

a.

Install the 3 brake actuator bolt cushions to the brake actuator bracket.


Hide 2.INSTALL BRAKE ACTUATOR CASE COLLAR

a.

Install the 3 brake actuator case collars to the 3 brake actuator bolt cushions.


Hide 44590 3.INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY

a.

Install the brake actuator to the brake actuator bracket with the 3 bolts.

C332388C02
0.302,0.219 0.677,0.458 0.375,0.24 12 false *A 3.979,0.24 4.354,0.479 0.375,0.24 12 false *B 5.198,0.365 5.354,0.563 0.156,0.198 10 false C 6.063,1.74 6.219,1.938 0.156,0.198 10 false A 4.99,1.99 5.146,2.188 0.156,0.198 10 true B 2.74,1.521 2.896,1.719 0.156,0.198 10 false A 1.396,2.031 1.552,2.229 0.156,0.198 10 true B 1.646,0.521 1.802,0.719 0.156,0.198 10 true C
*A for LHD *B for RHD


Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

Tighten the 3 bolts uniformly in alphabetical order.