Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR
RM33J0E _51 Engine / Hybrid System _038423 1GD-FTV EMISSION CONTROL _0201049 EXHAUST GAS TEMPERATURE SENSOR G

1GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89425 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 89.3 to 159.8 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.


Hide 89425A 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 89.3 to 159.8 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the No. 2 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.


Hide 89425B 3.INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 89.3 to 159.8 kΩ


HINT:

The temperature indicated in "Condition" is the temperature of the No. 3 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.