Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR
RM33J0E _51 Engine / Hybrid System _038423 1GD-FTV EMISSION CONTROL _0201052 DIFFERENTIAL PRESSURE SENSOR A

1GD-FTV EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343692

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 89481B 2.REMOVE DIFFERENTIAL PRESSURE SENSOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A344451

Disconnect the connector from the differential pressure sensor.


b.

Remove the bolt and differential pressure sensor from the pipe clamp.


c.
A344452

Slide the 2 clamps and disconnect the 2 air hoses from the No. 1 vacuum pipe and No. 2 vacuum pipe.


d.
A346700

Slide the 2 clamps and remove the 2 No. 1 air hoses from the differential pressure sensor.