Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › EGR BYPASS VALVE SWITCHING VALVE
RM33J0E _51 Engine / Hybrid System _038440 2GD-FTV EMISSION CONTROL _0201058 EGR BYPASS VALVE SWITCHING VALVE A

2GD-FTV EMISSION CONTROL  EGR BYPASS VALVE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL NO. 1 VACUUM SWITCHING VALVE ASSEMBLY

a.

Install the No. 1 vacuum switching valve assembly to the bracket with the screw.

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


b.

Connect the vacuum hose to the No. 1 vacuum switching valve assembly.


Hide 25804 2.INSTALL VACUUM CONTROL VALVE SET

a.

Install the vacuum control valve set to the intake manifold with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 2 vacuum hoses to the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.


c.

Connect the engine wire bracket with the bolt.

Torque:
18.5 N*m (189 kgf*cm, 14 ft.*lbf)


Hide 12601B 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY