Home › Engine / Hybrid System › 2KD-FTV LUBRICATION › OIL PRESSURE SWITCH
RM33J0E _51 Engine / Hybrid System _038452 2KD-FTV LUBRICATION _0201091 OIL PRESSURE SWITCH G

2KD-FTV LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the connector from the engine oil pressure switch assembly.


b.

Start the engine.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher


If the result is not as specified, replace the engine oil pressure switch assembly.