Home › Engine / Hybrid System › 2KD-FTV LUBRICATION › OIL PRESSURE SWITCH
RM33J0E _51 Engine / Hybrid System _038452 2KD-FTV LUBRICATION _0201091 OIL PRESSURE SWITCH A

2KD-FTV LUBRICATION  OIL PRESSURE SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343696

To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.


PROCEDURE

Hide 51442 1.REMOVE NO. 2 ENGINE UNDER COVER (for 4WD and Pre-Runner)

Hide 83530 3.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

CAUTION:

To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.


a.

Disconnect the connector from the engine oil pressure switch assembly.


b.

Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly from the oil cooler cover sub-assembly.