Home › Drivetrain › RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE › OUTPUT SHAFT
RM33J0E _52 Drivetrain _038468 RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE _0201309 OUTPUT SHAFT G

RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  INSPECTION  


PROCEDURE

Hide 33321 1.INSPECT OUTPUT SHAFT

a.
F051607

Using a cylinder gauge, measure the inside diameter of the output shaft.

Standard inside diameter:

45.009 to 45.025 mm (1.7721 to 1.7726 in.)


Maximum inside diameter:

45.025 mm (1.7726 in.)


If the diameter is more than the maximum, replace the output shaft.