Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55900
1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Automatic Air Conditioning System)
Connect the air conditioning duct sub-assembly.
Connect the cooler thermistor (room temperature sensor) connector.
Connect the connector.
Attach the clip to install the air conditioning control assembly.
55900
2.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (WINDOW DEFOGGER SWITCH) (for Manual Air Conditioning System)
Attach the claw to install the air conditioning control assembly.
55908A
3.CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
55906A
4.CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
55909A
5.CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
84013A
6.INSTALL INTEGRATION PANEL SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)
55918A
7.INSTALL AIR INLET DAMPER CONTROL LEVER (for Manual Air Conditioning System)
55905J
8.INSTALL CONTROL KNOB SUB-ASSEMBLY (for Manual Air Conditioning System)
55410C
9.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
45100
10.INSTALL STEERING WHEEL ASSEMBLY