Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM › from 2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0219141 AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM C

LIGHTING (EXT)  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM  B2451  Vehicle Specifications have not been Stored  


DESCRIPTION

The headlight leveling ECU assembly stores this DTC if the vehicle specifications have not been stored in the ECU.

HINT:

The vehicle specifications are stored in the ECU at the factory.


DTC No. Detection Item DTC Detection Condition Trouble Area
B2451 Vehicle Specifications have not been Stored Vehicle specifications have not been stored Headlight leveling ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

If the headlight leveling ECU assembly has been replaced, it is necessary to initialize the headlight leveling ECU assembly.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>INITIALIZATION


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>DTC CHECK / CLEAR

Body Electrical > HL AutoLeveling > Clear DTCs
50002 361

b.

Check for DTCs.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM>DTC CHECK / CLEAR

Body Electrical > HL AutoLeveling > Trouble Codes
50001 361
OK:

DTC B2451 is not output.



Result:
Proceed to
OK
NG



OK

END

NG

REPLACE HEADLIGHT LEVELING ECU ASSEMBLY