LED HEADLIGHT SYSTEM (for LED Headlight)
The headlight leveling ECU assembly stops headlight operation when the following malfunctions are detected.
| Condition | Description |
|---|---|
| Output Open Circuit Malfunction | ·
Headlight illumination stops. ·
Current condition is maintained until power supply is reinstated (headlight dimmer switch turned from off to head). |
| Short Circuit Malfunction Between Output Terminals | ·
Headlight illumination stops. ·
Current condition is maintained until power supply is reinstated (headlight dimmer switch turned from off to head). |
| Output Terminal - Ground Leak Malfunction | ·
Headlight illumination stops. ·
Current condition is maintained until power supply is reinstated (headlight dimmer switch turned from off to head). |
| Output Undervoltage Malfunction | ·
When output undervoltage occurs, headlight illumination stops. ·
Current condition is maintained until power supply is reinstated (headlight dimmer switch turned from off to head). |
| Output Overvoltage Malfunction | ·
When output overvoltage occurs, headlight illumination stops. ·
Current condition is maintained until power supply is reinstated (headlight dimmer switch turned from off to head). |
| Input Overvoltage Malfunction | ·
When input overvoltage occurs (20 +/-3 V or higher), headlight illumination stops. ·
Headlight illumination restarts once voltage returns to operating voltage range (10 to 16 V). |
| Input Undervoltage Malfunction | ·
When input undervoltage occurs (below 7 V), headlight illumination stops. ·
Headlight illumination restarts once voltage returns to operating voltage range (10 to 16 V). |