Home › Drivetrain › RC60F / RC61F MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSMISSION SYSTEM › from 2015.11
RM33J0E _52 Drivetrain _038469 RC60F / RC61F MANUAL TRANSMISSION / TRANSAXLE _0197913 MANUAL TRANSMISSION SYSTEM U

RC60F / RC61F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION SYSTEM  TERMINALS OF ECM  


ECM


A340466E12
0.531,0.438 0.969,0.677 0.438,0.24 1.74,0.438 2.177,0.677 0.438,0.24 2.844,0.438 3.281,0.677 0.438,0.24 3.885,0.438 4.323,0.677 0.438,0.24 5,0.438 5.438,0.677 0.438,0.24 6.156,0.438 6.594,0.677 0.438,0.24 1.844,0.469 2.156,0.667 0.313,0.198 10 false C58 0.635,0.469 0.948,0.667 0.313,0.198 10 false C57 2.938,0.469 3.25,0.667 0.313,0.198 10 false C59 3.99,0.469 4.302,0.667 0.313,0.198 10 false C60 5.083,0.469 5.396,0.667 0.313,0.198 10 false G85 6.25,0.469 6.563,0.667 0.313,0.198 10 false G86

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C59-12 (NIMB) - C60-1 (E1) B - W-B Power supply for transmission revolution sensor Ignition switch ON 11 to 14 V
C59-13 (NIMO) - C60-1 (E1) W - W-B Transmission revolution sensor signal Engine idling and clutch pedal fully released Pulse generation
G85-8 (MTMS) - C60-1 (E1) B - W-B iMT switch signal Ignition switch ON and iMT switch pushed Below 1.5 V
Ignition switch ON and iMT switch not pushed 11 to 14 V
G85-17 (CANH) - C60-1 (E1) B - W-B CAN communication line Ignition switch ON Pulse generation
G85-28 (CANL) - C60-1 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
G86-20 (CLS) - G86-21 (E2CL) SB - R Clutch stroke sensor signal Ignition switch ON and clutch pedal fully released 0.2 to 1.5 V
Ignition switch ON and clutch pedal fully depressed 2.5 to 4.8 V
G86-23 (VCCL) - C60-1 (E1) G - W-B Power supply for clutch stroke sensor Ignition switch ON 4.5 to 5.5 V