Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for LHD vehicles.
1.REMOVE FRONT SEAT ASSEMBLY RH
for Manual Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL
for Power Seat:
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL
G9221A
2.REMOVE UPPER INVERTER COVER
Detach the clip and guide and remove the upper inverter cover.
86210A
3.REMOVE VOLTAGE INVERTER ASSEMBLY
|
Bolt |
|
Connector |
Roll up the floor carpet.
Disconnect the connector and remove the 2 bolts.
Detach the guide and remove the voltage inverter assembly with the voltage inverter bracket.
86247A
4.REMOVE VOLTAGE INVERTER BRACKET
Remove the 2 nuts and voltage inverter bracket from the voltage inverter.