84222
1.INSPECT NO. 1 TRANSFER INDICATOR SWITCH (REAR DIFFERENTIAL LOCK POSITION SWITCH)
| *a | Component without harness connected
(No. 1 Transfer Indicator Switch (Rear Differential Lock Position Switch)) |
|
ON |
|
OFF |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1(GND) - 2 (RLY2) | ON | Below 1 Ω |
| OFF | 10 kΩ or higher |
If the result is not as specified, replace the No. 1 transfer indicator switch (rear differential lock position switch).