Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for LED Headlight) › from 2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0234534 HEADLIGHT ASSEMBLY(for LED Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for LED Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 85669 1.INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING

a.

Install a new headlight leveling motor base packing to the headlight unit.


Hide 85662 2.INSTALL HEADLIGHT LEVELING MOTOR LH

a.

Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.


b.

Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.


c.
E316881C01
1.396,1.74 1.635,0.74 true 1.323,1.75 1.635,1.906 0.313,0.156 10 false *a
*a Aiming Screw
V113147

Tighten in this Direction
V113148

Clockwise


Insert the headlight leveling motor LH.


d.

Turn the headlight leveling motor LH clockwise to install it.

HINT:

For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.



e.

Tighten the aiming screw 20 rotations.


Hide 81510C 3.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.
E316868C01
1.073,2.135 1.469,2.135 false 2,2.146 2.396,2.146 false 0.896,2.042 1.208,2.198 0.313,0.156 10 false *a 2.448,2.042 2.76,2.198 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.


b.
E316869C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.


Hide 81515B 4.INSTALL FRONT TURN SIGNAL LIGHT SOCKET

E316873C01
2.313,3.698 2.76,3.958 true 2.448,0.323 2.188,0.667 true 2.208,1.604 2.063,0.76 true 2.156,1.646 2.385,1.823 0.229,0.177 10 true *a 2.49,0.219 2.708,0.385 0.219,0.167 10 true *b 2.802,3.875 3.115,4.031 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


a.

Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.


Hide 81110B 5.INSTALL NO. 1 HEADLIGHT BULB

a.

Insert the No. 1 headlight bulb into the headlight unit.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



b.
E316871C01
0,0 0,0 false
V113147

Clockwise


Turn the No. 1 headlight bulb clockwise until the bulb stops to install it.