Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY LH
| *A | w/ Headlight Leveling |
Connect the 3 connectors and 2 wire harness clamps.
|
Connect the Seat of the Screw. |
Push the headlight assembly LH backward and connect the bracket to the seat of the screw.
Be careful not to break the bracket.
Install the 3 screws and bolt.
2.INSTALL FRONT BUMPER COVER
3.ADJUST HEADLIGHT AIMING
4.ADJUST FOG LIGHT AIMING (w/ Fog Light)