Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2015.11
RM33J0E _59 Vehicle Exterior _038514 EXTERIOR PANELS / TRIM _0188890 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

As the rear bumper assembly is extremely heavy, the engine lifter may suddenly drop if the instructions listed in the repair manual are not followed. Therefore, always follow the instructions listed in the repair manual when performing this procedure.


PROCEDURE

Hide 81270 1.REMOVE LICENSE PLATE LIGHT ASSEMBLY (for Deck-less)

Hide 75102 2.REMOVE REAR LICENSE PLATE BRACKET SUB-ASSEMBLY (for Deck-less)

a.
B442432

Remove the 2 bolts and rear license plate bracket sub-assembly.


Hide 3.REMOVE REAR BUMPER ASSEMBLY

a.

Loosen the 2 temporary bolts.

B399486C01
1.219,2.521 1.229,2.542 false
V100135

Bolt
V100136

Temporary Bolt



b.

Using an engine lifter or equivalent, remove the 2 bolts and rear bumper assembly.

NOTICE:
·

Using plate lift attachments or equivalent, set the rear bumper assembly on a flat surface.

·

Be sure to perform the operation with 2 persons or more.

·

Be careful not to damage the rear bumper assembly.




c.

Remove the 2 temporary bolts from the vehicle body.