Home › Vehicle Exterior › LIGHTING (EXT) › REAR TURN SIGNAL LIGHT BULB › from 2015.11
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189319 REAR TURN SIGNAL LIGHT BULB A

LIGHTING (EXT)  REAR TURN SIGNAL LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81560 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

a.

Open the tail gate.


b.
E318124C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the rear combination light assembly LH.


c.
E316924

Remove the 2 bolts.


d.
E316925C01
0,0 0,0 false
V113147

Pull in this Direction


Pull the rear combination light assembly LH as shown to detach the 2 clips and disconnect it.


Hide 81561 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)

a.

w/o Bumper:

i.
E323560

Disconnect the connector.


ii.
E323559

Remove the 4 screws and rear combination light lens LH.



b.
E344805

w/ Bumper:

Remove the 4 screws and rear combination light lens LH.


Hide 81551 3.REMOVE REAR COMBINATION LIGHT LENS RH (for Deck-less)

a.
E323550

Remove the 4 screws and rear combination light lens RH.


Hide 81550L 4.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E316933C01
1,0.74 1.833,0.74 true 0.74,3.333 1.573,3.333 true 0.802,0.635 0.99,0.802 0.188,0.167 10 true *a 0.552,3.219 0.74,3.406 0.188,0.188 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


w/ Deck:

i.

Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.


ii.
E316935C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


Push the rear turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.
E323553C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Counterclockwise
V113149

Remove in this Direction


for Deck-less:

Push the rear turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.


Hide 81550L 5.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E296856C02
1,1.104 1.427,1.104 false 1.948,1.104 2.375,1.104 false 0.802,1 1.115,1.156 0.313,0.156 10 false *a 2.438,1 2.75,1.156 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


w/ Deck:

i.

Align the 2 protrusions on the back up light bulb with the 2 cutouts of the bulb socket and insert the bulb into the bulb socket.


ii.
E316936C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the rear turn signal light bulb, turn the bulb clockwise to install the bulb.


iii.
E316934C01
1.115,0.948 1.594,0.74 true 1.125,0.594 1.563,0.594 true 1.49,3.188 1.906,3.333 true 0.948,0.875 1.135,1.052 0.188,0.177 10 true *a 0.938,0.5 1.125,0.677 0.188,0.177 10 true *b 1.313,3.083 1.49,3.26 0.177,0.177 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Clockwise


Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.



b.

for Deck-less:

i.
E296841C02
0.969,1.146 1.438,1.146 false 1.979,1.146 2.448,1.146 false 0.76,1.042 1.073,1.198 0.313,0.156 10 false *a 2.5,1.052 2.813,1.208 0.313,0.156 10 false *a
*a Protrusion
V100135

Cutout


Align the 2 protrusions on the rear turn signal light bulb with the 2 cutouts of the rear combination light body and insert the bulb to the rear combination light body.


ii.
E323554C01
0,0 0,0 false
V113147

Push in this Direction
V113148

Clockwise


While pushing the rear turn signal light bulb, turn the bulb clockwise to install the bulb.



Hide 81560 6.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

a.
E316926C01
0,0 0,0 false
V113147

Install in this Direction
V100155

Protective Tape


Attach the 2 clips to install the rear combination light assembly LH.


b.
E318125C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Push in this Direction


Install the 2 bolts.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)

HINT:

Place your hands at the location shown in the illustration and while pushing the rear combination light assembly LH indicated by the arrow, tighten the 2 bolts.



c.

Close the tail gate.


Hide 81561 7.INSTALL REAR COMBINATION LIGHT LENS LH (for Deck-less)

a.

w/o Bumper:

i.

Install the rear combination light lens LH with the 4 screws.


ii.

Connect the connector.



b.

w/ Bumper:

Install the rear combination light lens LH with the 4 screws.


Hide 81551 8.INSTALL REAR COMBINATION LIGHT LENS RH (for Deck-less)

a.

Install the rear combination light lens RH with the 4 screws.