Home › Drivetrain › AC60E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY › from 2016.07
RM33J0E _52 Drivetrain _053789 AC60E AUTOMATIC TRANSMISSION / TRANSAXLE _0264422 VALVE BODY ASSEMBLY A

AC60E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the valve body assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
·

Transmission valve body assembly

·

Any of the shift solenoid valves


Reset memory Large shift shock (Click here)

PROCEDURE

Hide 35330 2.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

a.
C318918

Remove the 3 bolts and valve body oil strainer assembly from the transmission valve body assembly.


b.

Remove the O-ring from the valve body oil strainer assembly.


Hide 35410 3.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C318512

Remove the bolt, detent spring cover and detent spring from the transmission valve body assembly.


b.
C318513

Remove the 12 bolts and transmission valve body assembly from the automatic transmission case sub-assembly.


Hide 4.REMOVE MANUAL VALVE

a.
C318909

Remove the manual valve from the transmission valve body assembly.


Hide 35145C 5.REMOVE TRANSMISSION CASE GASKET

a.
C318514

Remove the 2 transmission case gaskets from the automatic transmission case sub-assembly.