Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › THROTTLE BODY › from 2016.07
RM33J0E _51 Engine / Hybrid System _053773 2TR-FBE ENGINE CONTROL _0264890 THROTTLE BODY G

2TR-FBE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A223680C27
2.271,1.552 2.271,1.146 false 2.667,1.563 2.667,1.146 false 2.167,1.573 2.479,1.792 0.313,0.219 10 false M+ 2.604,1.573 2.917,1.833 0.313,0.26 10 false M- 0.104,0.125 0.406,0.385 0.302,0.26 10 false *a
*a Component without harness connected
(Throttle Body with Motor Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.