Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264912 FUEL SENDER GAUGE ASSEMBLY G

2TR-FBE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A382803C01
0.365,1.323 0.844,1.323 true 0.438,3.198 0.792,3.198 true 0.052,0.052 0.26,0.25 0.208,0.198 10 false *a 0.292,3.104 0.448,3.302 0.156,0.198 10 false E 0.219,1.229 0.375,1.427 0.156,0.198 10 false F
*a Front view of wire harness connector
(to Fuel Sender Gauge Assembly)


Check that the float moves smoothly between F and E.


b.

Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 F 13.5 to 16.5 Ω
Between E and F 13.5 to 418.2 Ω (Gradually changes)
E 401.8 to 418.2 Ω


HINT:

If the value is not as specified, replace the fuel sender gauge assembly.