Home › Engine / Hybrid System › 2TR-FBE FUEL › RELAY › from 2016.07
RM33J0E _51 Engine / Hybrid System _053775 2TR-FBE FUEL _0264914 RELAY G

2TR-FBE FUEL  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28610 1.INSPECT GLOW PLUG RELAY ASSEMBLY

A296121N01
2.354,0.792 2.615,0.531 true 2.667,1.115 3.031,1.115 true 2.365,1.427 2.146,1.688 true 1.635,1.104 2,1.104 true 0.302,0.792 0.458,0.99 0.156,0.198 10 3 0.313,1.333 0.469,1.531 0.156,0.198 10 2 1.292,1.313 1.448,1.51 0.156,0.198 10 1 1.302,0.792 1.458,0.99 0.156,0.198 10 5 2.625,0.375 2.781,0.573 0.156,0.198 10 1 3.094,1.042 3.25,1.24 0.156,0.198 10 5 2.083,1.719 2.24,1.917 0.156,0.198 10 2 1.51,1.021 1.667,1.219 0.156,0.198 10 3

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the glow plug relay assembly.