Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
2.DRAIN ENGINE COOLANT
16572
3.DISCONNECT RADIATOR HOSE OUTLET
Slide the hose clamp and disconnect the radiator hose outlet from the water inlet.
16321
4.REMOVE WATER INLET
Disconnect the power steering oil pressure switch connector.
Remove the 2 nuts, bolt, water inlet and gasket.
16331A
5.REMOVE THERMOSTAT
Remove the thermostat from the timing chain cover sub-assembly.
Remove the gasket from the thermostat.