Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › MONOLITHIC CONVERTER(for i-ART) › from 2016.10
RM33J0E _51 Engine / Hybrid System _038423 1GD-FTV EMISSION CONTROL _0290153 MONOLITHIC CONVERTER(for i-ART) A

1GD-FTV EMISSION CONTROL  MONOLITHIC CONVERTER(for i-ART)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
A343692

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


PROCEDURE

Hide 17410 1.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 17578B 2.REMOVE PIPE CLAMP

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A386533

Remove the 3 bolts and pipe clamp from the engine cover bracket.


Hide 12631A 3.REMOVE ENGINE COVER BRACKET

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A386534

Detach the 2 clamp and disconnect the engine wire from the engine cover bracket.


b.
A386535

Remove the 2 bolts and engine cover bracket from the cylinder head sub-assembly.


Hide 17167 4.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A386536

Remove the 3 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold.


Hide 17271 5.REMOVE NO. 1 TURBO INSULATOR

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A386537

Remove the 3 bolts and No. 1 turbo insulator from the exhaust manifold and turbocharger sub-assembly.


Hide 17118 6.REMOVE NO. 2 EXHAUST PIPE SUPPORT STAY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A340284

Remove the bolt, 2 nuts and No. 2 exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 17118 7.REMOVE EXHAUST PIPE SUPPORT STAY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A340285

Remove the 3 bolts and exhaust pipe support stay from the cylinder block sub-assembly and exhaust manifold converter sub-assembly.


Hide 25051 8.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.
A386538

Remove the nut, exhaust pipe clamp and exhaust manifold converter sub-assembly from the turbocharger sub-assembly.


b.

Remove the gasket.