1.REMOVE REAR SEAT CUSHION ASSEMBLY
Use the same procedure for the opposite side.
| *1 | Lever |
|
Remove in this Direction |
Operate the lever of the rear seat cushion lock hook and detach the hook.
|
Remove in this Direction |
Pull up as shown in the illustration to detach the hook and remove the rear seat cushion assembly.
64271C
2.REMOVE BACK PANEL TRIM
71940A
3.REMOVE REAR SEAT HEADREST ASSEMBLY
Use the same procedure for the opposite side.
Remove the 3 bolts.
|
Remove in this Direction |
Detach the hook and remove the rear seat headrest assembly.
72693
4.REMOVE REAR SEAT CUSHION LOCK HOOK
Perform the following only when replacing the rear seat cushion lock hook.
Do not reuse the rear seat cushion lock hook after removing it.
Use the same procedure for the opposite side.
| *1 | Protective Tape |
Using a screwdriver, detach the claw and remove the rear seat cushion lock hook.
Tape the screwdriver tip before use.