Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for Smart Cab) › from 2016.10
RM33J0E _58 Vehicle Interior _038502 SEAT _0292513 REAR SEAT ASSEMBLY(for Smart Cab) A

SEAT  REAR SEAT ASSEMBLY(for Smart Cab)  INSTALLATION  


PROCEDURE

Hide 72693 1.INSTALL REAR SEAT CUSHION LOCK HOOK

NOTICE:
·

Perform the following only when replacing the rear seat cushion lock hook.

·

Do not reuse the rear seat cushion lock hook after removing it.



HINT:

Use the same procedure for the opposite side.


a.
B410511

Attach the claw to install a new rear seat cushion lock hook.


Hide 71940A 2.INSTALL REAR SEAT HEADREST ASSEMBLY

HINT:

Use the same procedure for the opposite side.


a.
B410509C01
0,0 0,0 false
V113147

Install in this Direction


Attach the hook.


b.
B410507N01
1.021,1.323 1.24,1.521 0.219,0.198 10 true (1) 2.115,1.354 2.333,1.552 0.219,0.198 10 true (2) 1.646,1.979 1.865,2.177 0.219,0.198 10 true (3)

Temporarily install the 3 bolts.


c.

Tighten the bolts in the order shown in the illustration to install rear seat headrest assembly.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


Hide 4.INSTALL REAR SEAT CUSHION ASSEMBLY

HINT:

Use the same procedure for the opposite side.


a.
B410506C01
0,0 0,0 false
V113147

Install in this Direction


Push as shown in the illustration to attach the guide to install the rear seat cushion assembly.


b.
B410504C01
0,0 0,0 false
V113147

Install in this Direction


Push as shown in the illustration to attach the hook to install the rear seat cushion assembly.