Home › Vehicle Exterior › BODY PANEL › NAME PLATE › 2015.08–2016.01
BM3270E _01 Vehicle Exterior _042774 BODY WELD POINT _0213646 NAME PLATE F

BODY WELD POINT  NAME PLATE  ATTACHMENT POSITION  


1.

Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

HINT:

Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.


2.

Wipe off the remaining double-sided tape using a clean cloth or equivalent.

NOTICE:

If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.


3.

After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

HINT:

The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.



B414883C01
3.5,1.833 3.167,1.833 3.167,1.833 3.167,1.417 true 3.208,0.958 3.208,0.542 3.208,0.542 3.542,0.542 true 4.5,1.417 4.5,1.833 4.5,1.833 5.083,1.833 true 4.719,4.667 4.385,4.667 false 4.063,7.26 4.479,7.26 false 3.667,5.781 3.667,5.448 3.667,5.448 4.167,5.448 false 4.583,7.167 5.813,7.365 1.229,0.198 10 false (1) ● *1 4.24,5.354 5.469,5.552 1.229,0.198 10 false (2) ● *2 4.792,4.573 6.021,4.771 1.229,0.198 10 false (3) ● *3 5.115,1.74 5.573,1.938 0.458,0.198 10 false (1) 3.531,1.75 3.74,1.958 0.208,0.208 10 true (2) 3.573,0.448 3.771,0.646 0.198,0.198 10 true (3)
*1 BACK DOOR MARK *2 BACK DOOR NAME PLATE
*3 NO. 1 BACK DOOR EMBLEM - -
● Non-reusable part - -


NO. 1 BACK DOOR EMBLEM


B410861C01
0.448,3.573 0.708,3.573 false 2.625,3.802 2.885,3.802 false 0.292,3.479 0.573,3.729 0.281,0.25 10 false *a 2.917,3.719 3.198,3.969 0.281,0.25 10 false *a
*a Boss



BACK DOOR NAME PLATE


B421611C01
0.073,0.052 0.323,0.302 0.25,0.25 10 true *a 0.677,1.438 0.813,1.635 0.135,0.198 10 true A 1.167,0.885 1.302,1.083 0.135,0.198 10 true B 1.635,0.885 1.771,1.083 0.135,0.198 10 true C 1.833,0.885 1.969,1.083 0.135,0.198 10 true D 2.115,0.885 2.25,1.083 0.135,0.198 10 true E 2.552,0.885 2.688,1.083 0.135,0.198 10 true G 2.667,0.656 2.813,0.823 0.146,0.167 10 true F 2.854,0.917 2.969,1.083 0.115,0.167 10 true H 3.458,1.438 3.583,1.625 0.125,0.188 10 true J 3.646,1.438 3.771,1.625 0.125,0.188 10 true K 3.573,0.646 3.688,0.813 0.115,0.167 10 true I 4.25,0.667 4.375,0.813 0.125,0.146 10 true L 5.115,0.667 5.25,0.823 0.135,0.156 10 true O 5.667,0.656 5.802,0.813 0.135,0.156 10 true R 6.396,1.438 6.521,1.615 0.125,0.177 10 true U 5.792,1.427 5.917,1.625 0.125,0.198 10 true T 5.573,1.438 5.698,1.635 0.125,0.198 10 true S 5.083,1.427 5.208,1.625 0.125,0.198 10 true Q 4.854,1.427 4.979,1.625 0.125,0.198 10 true P 4.135,1.438 4.26,1.635 0.125,0.198 10 true M 4.354,1.458 4.479,1.656 0.125,0.198 10 true N 2.073,1.823 2.208,2.021 0.135,0.198 10 true W 1.375,1.844 1.51,2.042 0.135,0.198 10 true V 0.844,0.51 0.979,0.688 0.135,0.177 10 true X 6.208,0.521 6.344,0.698 0.135,0.177 10 true Y
*a Reference Values - -


Standard:
Area Specified Condition Area Specified Condition
A 19.0 mm (0.748 in.) B 19.2 mm (0.756 in.)
C 19.3 mm (0.760 in.) D 19.4 mm (0.764 in.)
E 19.4 mm (0.764 in.) F 81.3 to 83.3 mm (3.20 to 3.28 in.)
G 19.5 mm (0.768 in.) H 19.5 mm (0.768 in.)
I 42.8 to 44.8 mm (1.69 to 1.76 in.) J 19.5 mm (0.768 in.)
K 19.5 mm (0.768 in.) L 43.0 to 45.0 mm (1.69 to 1.77 in.)
M 19.5 mm (0.768 in.) N 19.5 mm (0.768 in.)
O 83.1 to 85.1 mm (3.27 to 3.35 in.) P 19.4 mm (0.764 in.)
Q 19.3 mm (0.760 in.) R 41.3 to 43.3 mm (1.63 to 1.70 in.)
S 19.2 mm (0.756 in.) T 19.2 mm (0.756 in.)
U 19.0 mm (0.748 in.) V 38.5 to 40.5 mm (1.52 to 1.59 in.)
W 41.2 to 43.2 mm (1.62 to 1.70 in.) X 11.3 mm (0.445 in.)
Y 14.4 mm (0.567 in.) - -



BACK DOOR MARK


B414885C01
1.521,0.719 1.521,0.385 1.521,0.385 2.271,0.385 true 0.115,0.073 0.344,0.271 0.229,0.198 10 true *a 0.875,0.896 1.031,1.094 0.156,0.198 10 true A 2.438,0.885 2.615,1.052 0.177,0.167 10 true B 1.958,1.531 2.115,1.729 0.156,0.198 10 true C 2.281,0.271 2.5,0.5 0.219,0.229 10 true *b
*a Reference Values
*b Back Door R End


Standard:
Area Specified Condition
A 56.0 mm (2.20 in.)
B 56.0 mm (2.20 in.)
C 175.0 mm (6.89 in.)