After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Make sure the caution label is not attached over a spot weld.
When attaching the caution label, make sure not to touch the label's adhesive surface.
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
| *1 | AIR CONDITIONER INFORMATION LABEL | *2 | ECE APPROVED NUMBER LABEL |
| *3 | EMISSION CONTROL INFORMATION LABEL | - | - |
| *A | for Gasoline | *B | for Diesel |
| *1 | FUEL INFORMATION LABEL | - | - |
| *1 | CHILD PROTECTOR CAUTION LABEL | - | - |
| *A | for LHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *3 | CR LABEL | - | - |
| *A | for LHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *A | for RHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *A | for RHD | - | - |
| *1 | SIDE AIRBAG CAUTION LABEL | *2 | TIRE PRESSURE INFORMATION LABEL |
| *3 | NAME LABEL | - | - |