Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
| *1 | BACK DOOR NAME PLATE | *2 | NO. 1 BACK DOOR EMBLEM |
| ● | Non-reusable part | - | - |
| *1 | BACK DOOR MARK | *2 | NO. 1 BACK DOOR NAME PLATE |
| *3 | NO. 2 BACK DOOR NAME PLATE | - | - |
| ● | Non-reusable part | - | - |
NO. 1 BACK DOOR EMBLEM
| *a | Boss |
BACK DOOR NAME PLATE
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 19.0 mm (0.748 in.) | B | 19.2 mm (0.756 in.) |
| C | 19.3 mm (0.760 in.) | D | 19.4 mm (0.764 in.) |
| E | 19.4 mm (0.764 in.) | F | 81.3 to 83.3 mm (3.20 to 3.28 in.) |
| G | 19.5 mm (0.768 in.) | H | 19.5 mm (0.768 in.) |
| I | 42.8 to 44.8 mm (1.69 to 1.76 in.) | J | 19.5 mm (0.768 in.) |
| K | 19.5 mm (0.768 in.) | L | 43.0 to 45.0 mm (1.69 to 1.77 in.) |
| M | 19.5 mm (0.768 in.) | N | 19.5 mm (0.768 in.) |
| O | 83.1 to 85.1 mm (3.27 to 3.35 in.) | P | 19.4 mm (0.764 in.) |
| Q | 19.3 mm (0.760 in.) | R | 41.3 to 43.3 mm (1.63 to 1.70 in.) |
| S | 19.2 mm (0.756 in.) | T | 19.2 mm (0.756 in.) |
| U | 19.0 mm (0.748 in.) | V | 38.5 to 40.5 mm (1.52 to 1.59 in.) |
| W | 41.2 to 43.2 mm (1.62 to 1.70 in.) | X | 11.3 mm (0.445 in.) |
| Y | 14.4 mm (0.567 in.) | - | - |
BACK DOOR MARK
| *a | Reference Values |
| *b | Back Door R End |
| Area | Specified Condition |
|---|---|
| A | 56.0 mm (2.20 in.) |
| B | 175.0 mm (6.89 in.) |
| C | 263.0 mm (10.4 in.) |
NO. 2 BACK DOOR NAME PLATE
| *a | Reference Values |
| *b | Back Door R End |
| Area | Specified Condition |
|---|---|
| A | 56.0 mm (2.20 in.) |
| B | 116.0 mm (4.57 in.) |
NO. 1 BACK DOOR NAME PLATE
| *a | Reference Values |
| *b | Back Door R End |
| Area | Specified Condition |
|---|---|
| A | 54.0 mm (2.13 in.) |
| B | 37.0 mm (1.46 in.) |