Home › Drivetrain › CLUTCH › CLUTCH SYSTEM › 2015.08–2016.01
NM3270E _52 Drivetrain _042511 CLUTCH _0197865 CLUTCH SYSTEM GE GENERAL F

CLUTCH  CLUTCH SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A dry type single plate clutch, which is operated by hydraulic pressure, is used.


b.

A low-peak effort clutch type clutch cover is used.


c.

A resin clutch master cylinder is used. Also, on models with the intelligent Manual Transmission (iMT) system, an integrated clutch stroke sensor type master cylinder assembly is used.


d.

A clutch accumulator assembly is used.


e.

A clutch pedal with turnover spring is used.


f.

A clutch start system is used.

X126746



SPECIFICATION


Clutch Type Single Dry Plate, Diaphragm
Operation Hydraulic
Clutch Cover Type Low-peak Effort Clutch
Installed Load 9300 N
Clutch Disc Facing Size* 275.0 mm x 175.0 mm (10.8 in. x 6.9 in.)
Master Cylinder Type Plunger
Cylinder Diameter 19.05 mm (0.75 in.)
Release Cylinder Type Conventional
Cylinder Diameter 22.2 mm (0.87 in.)
Clutch Pedal With Turnover Spring

HINT:

*: Outer diameter x inner diameter