OUTLINE
Front Differential
An SD20CD type front differential.
An Automatic Disconnecting Differential (A.D.D.) actuator (differential motor actuator assembly) is installed to the SD20CD type front differential. The A.D.D. actuator (differential motor actuator assembly) connects and disconnects the driveline between the transfer and the front wheels. For details, see the TRANSFER / 4WD / AWD section.
An oil temperature warning system is provided. The temperature sensor is positioned on the front differential to monitor the oil temperature of the front differential. For details, see the TRANSFER / 4WD / AWD section.
Rear Differential
A BD22AN type rear differential is used.
The BD22AN type rear differential has a built-in electronic differential lock mechanism.
SPECIFICATION
Front Differential
| Differential Type | SD20CD (with A.D.D. Actuator) | |
| Transmission Type | RC61F | AC60F |
| Differential Gear Ratio | 3.583 | 3.909 |
| Ring Gear Size | 205.0 mm (8.0 in.) | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| Drive Pinion No. of Gear Teeth | 12 | 11 |
| No. of Differential Pinion | 2 | ← |
| Oil Capacity | 1.6 Liters (1.69 US qts, 1.41 Imp. qts) | ← |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← |
| Oil Viscosity | SAE 75W-85 | ← |
| Oil Grade | API GL-5 | ← |
Rear Differential
| Differential Type | BD22AN (with Electronic Differential Lock Mechanism) | |
| Transmission Type | RC61F | AC60F |
| Differential Gear Ratio | 3.583 | 3.909 |
| Ring Gear Size | 225.0 mm (8.8 in.) | ← |
| Ring Gear No. of Gear Teeth | 43 | ← |
| Drive Pinion No. of Gear Teeth | 12 | 11 |
| No. of Differential Pinion | 4 | ← |
| Oil Capacity | 3.50 Liters (3.70 US qts, 3.00 Imp. qts) | ← |
| Oil Type | Toyota Genuine Differential Gear Oil LT or Equivalent | ← |
| Oil Viscosity | SAE 75W-85 | ← |
| Oil Grade | API GL-5 | ← |
PRECAUTION
The ABS, TRC and VSC functions in the brake control system stop while the rear differential lock system is operating.