Home › Engine / Hybrid System › 2GD-FTV FUEL › FUEL SYSTEM › from 2016.01
NM3270E _51 Engine / Hybrid System _048552 2GD-FTV FUEL _0230937 FUEL SYSTEM DE DETAILS F

2GD-FTV FUEL  FUEL SYSTEM  DETAILS  INJECTOR  


CONSTRUCTION


a.

Each injector assembly consists of a nozzle needle, a control plate and a solenoid valve.


b.

An injector compensation value and a Quick Response (QR) code containing encoded characteristics of the injector are printed on each injector.


c.

The injector compensation value and QR code contain various pieces of information regarding the injector, such as model code and injection volume correction.

W123655C01
1.25,2.104 1.823,2.365 true 1.927,2.75 2.594,2.438 true 1.26,2.771 1.885,3.052 true 1.906,3.375 1.615,3.521 true 5.865,1.708 5.552,2.063 true 5.865,2.844 5.563,2.521 true 1.094,1.979 1.406,2.135 0.313,0.156 10 false *1 1.104,2.646 1.417,2.802 0.313,0.156 10 false *2 1.448,3.427 1.76,3.583 0.313,0.156 10 false *3 2.635,2.292 2.948,2.448 0.313,0.156 10 false *4 5.875,1.563 6.188,1.719 0.313,0.156 10 false *5 5.906,2.781 6.219,2.938 0.313,0.156 10 false *6
*1 Solenoid *2 Nozzle Needle
*3 Low Suck Volume Nozzle *4 Control Plate
*5 Injector Compensation Value *6 QR Code




OPERATION


a.

When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.


b.

The out-orifice of the control chamber opens, allowing the fuel to flow out.


c.

The fuel pressure in the control chamber drops.


d.

Simultaneously, nozzle needle lifts and fuel is injected.


e.

As the control valve closes, the pressure of the control camber and intermediate chamber are equalized.


f.

The control plate is pushed down by in-orifice pressure, allowing fuel to flow to the control chamber.


g.

As control chamber pressure increases, the nozzle needle closes with the force of the spring and fuel injection is stopped.


h.

When the control chamber and in-orifice pressure equalize, the control plate rises due to the force of the spring.

W123659C01
1.583,1.719 2.063,1.583 true 0.625,1.125 1.073,1.385 true 0.635,1.75 1.406,1.865 true 0.677,2.188 1.292,1.927 true 2.083,2.406 1.531,2.031 true 0.479,1 0.792,1.156 0.313,0.156 10 false *1 0.49,1.646 0.802,1.802 0.313,0.156 10 false *2 0.521,2.104 0.833,2.26 0.313,0.156 10 false *3 2.104,1.479 2.417,1.635 0.313,0.156 10 false *4 2.115,2.333 2.427,2.49 0.313,0.156 10 false *5 1.344,3.344 1.656,3.5 0.313,0.156 10 false *a 3.521,3.354 3.833,3.51 0.313,0.156 10 false *b 5.719,3.333 6.031,3.49 0.313,0.156 10 false *c
*1 Control Valve *2 Out-orifice
*3 Control Plate *4 In-orifice
*5 Control Chamber - -
*a Before fuel injection *b Fuel injection
*c After fuel injection - -
V100144

High Fuel Pressure
V100145

Low Fuel Pressure