Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › from 2016.01
NM3270E _51 Engine / Hybrid System _048551 2GD-FTV EMISSION CONTROL _0230938 EMISSION CONTROL SYSTEM CO CONTROL F

2GD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the emission control system are as follows:

Component Function
ECM Controls the emission control system based on signals from each sensor.
Electric EGR Control Valve Assembly Actuated by the ECM, this valve controls the flow rate of EGR gas.
EGR Valve Position Sensor (Built into Electric EGR Control Valve Assembly) Detects the EGR valve position.
Diesel Throttle Valve Actuated by the ECM, this valve controls the flow rate of intake air.
EGR Cooler Cools EGR gas.
No. 2 EGR Valve Assembly Switches the flow passage of EGR gas in 2 stages.



FUNCTION


a.

The main function of the emission control system is as follow:

Function Outline
EGR Control This system is designed to help reduce and control NOx formation due to a reduction of peak temperature in the engine combustion chamber, which is accomplished by the introduction of an amount of inert gas into the intake manifold.