Home › Engine / Hybrid System › 2TR-FE STARTING › STARTING SYSTEM › from 2016.01
NM3270E _51 Engine / Hybrid System _048564 2TR-FE STARTING _0230967 STARTING SYSTEM GE GENERAL F

2TR-FE STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A planetary reduction type starter is used on except models for cold area.


b.

A conventional reduction type starter is used on the models for cold area.


c.

A starter control (cranking hold function) is used on the models with entry and start system. Once the engine switch is pushed, this control continues to operate the starter until the engine has started.



SPECIFICATION


Model Except Cold Area Specification Models Cold Area Specification Models
Manufacturer BOSCH DENSO DENSO
Rating Output 1.4kw 1.6kW 2.0 kW
Rating Voltage 12 V 12 V 12 V
Length*1 201.25mm (7.92 in.) 190.8 mm (7.51 in.) 187.5 mm (7.38 in.)
Weight 3400 g (7.5 lb) 3350 g (7.4 lb) 4600 g (10.1 lb)
Rotating Direction*2 Clockwise Clockwise Clockwise

HINT:

*1: Length from the mounted area to the rear end of the starter.

*2: Viewed from pinion side.