Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › ENGINE UNIT › from 2016.01
NM3270E _51 Engine / Hybrid System _048693 5L-E ENGINE MECHANICAL _0231308 ENGINE UNIT DE DETAILS F

5L-E ENGINE MECHANICAL  ENGINE UNIT  DETAILS  INTAKE AND EXHAUST VALVE AND VALVE LIFTER  


CONSTRUCTION


a.

Heat-resistant steel is used for the intake and exhaust valves.


b.

Unequal-pitch springs with anomalous cross sections are used to improve the surge resistance of the inner compression springs.


c.

The valve adjusting shim has been located directly above the valve lifter. This construction allows the valve adjusting shim to be replaced without removing the camshaft, which improves the serviceability during valve clearance adjustment.


d.

A cutout is provided in the valve lifter to improve the serviceability of the valve adjusting shims when replacement is required.

W102219C01
1.333,0.677 2.083,1 true 1.344,0.906 2.125,1.063 true 1.385,1.24 2.031,1.333 true 1.396,1.51 2.115,1.406 true 2.458,2.677 2.833,2.656 true 2.448,1.094 2.823,1.052 true 2.365,0.896 2.781,0.74 true 2.479,0.396 2.896,0.24 true 5.479,1.688 5.854,1.646 true 5.458,0.823 5.833,0.781 true 5.771,2.469 5.292,1.583 true 1.135,0.563 1.448,0.719 0.313,0.156 10 false *1 1.135,0.833 1.448,0.99 0.313,0.156 10 false *2 1.156,1.167 1.469,1.323 0.313,0.156 10 false *3 1.167,1.427 1.479,1.583 0.313,0.156 10 false *4 2.885,2.563 3.198,2.719 0.313,0.156 10 false *5 2.854,0.99 3.167,1.146 0.313,0.156 10 false *6 2.813,0.667 3.125,0.823 0.313,0.156 10 false *7 2.927,0.156 3.24,0.313 0.313,0.156 10 false *8 1.51,2.083 1.823,2.24 0.313,0.156 10 false *a 5.771,2.49 6.083,2.646 0.313,0.156 10 false *b 5.896,1.583 6.208,1.74 0.313,0.156 10 false *6 5.896,0.719 6.208,0.875 0.313,0.156 10 false *7
*1 Valve Spring Retainer *2 Spring Retainer Lock
*3 Inner Compression Spring *4 Valve Stem Oil Seal
*5 Valve *6 Valve Lifter
*7 Valve Adjusting Shim *8 Camshaft
*a Spring Cross Section *b Cutout


HINT:

The valve adjusting shims are available in 17 sizes in increments of 0.05 mm (0.002 in.), from 2.50 mm (0.098 in.) to 3.30 mm (0.130 in.). For details, refer to the Repair Manual.