Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENTRY AND START SYSTEM › from 2016.01
NM3270E _58 Vehicle Interior _042530 THEFT DETERRENT / KEYLESS ENTRY _0244724 ENTRY AND START SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENTRY AND START SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The entry and start system has the following main functions, making it a very user-friendly system.

Function Outline
Start Function The start function is operated by simply pressing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.
·

The power source mode changes depending on the depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1.


Immobiliser The immobiliser function compares the ID code registered in the certification ECU*3 or ID code box*4 with the ID code of the transponder chip embedded in the electrical key transmitter sub-assembly.
Steering Lock The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly.
Entry Function Entry Unlock:
·

All doors unlock when the lock/unlock switch on an outside door handle is pressed.


Entry Lock:
·

All doors lock when the lock/unlock switch on an outside door handle is pressed.


Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors at a distance. The basic operation is the same as that of the wireless door lock control system.

*1: Models with automatic transmission

*2: Models with manual transmission

*3: Models without ID code box

*4: Models with ID code box