Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM › from 2016.01
NM3270E _58 Vehicle Interior _042530 THEFT DETERRENT / KEYLESS ENTRY _0198053 IMMOBILISER SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The immobiliser system compares the ID code registered in the transponder key ECU with the ID code of the transponder chip embedded in the ignition key. The system is unset if these ID codes match. Thus, the transponder key ECU and the ECM communicate with each other to authorize fuel injection and ignition*, enabling the engine to start.

*: Models with gasoline engine



b.

This content applies to models without a smart entry and start system. For details on models with a smart entry and start system, see Immobiliser Function in Smart Entry and Start System.

HINT:

When replacing the transponder key ECU or making a new ignition key, key recognition code(s) must be registered. For details of the recognition code registration procedure, refer to the Service Bulletin.