Home › Drivetrain › CLUTCH › CLUTCH SYSTEM › from 2016.01
NM3270E _52 Drivetrain _042511 CLUTCH _0197865 CLUTCH SYSTEM DE DETAILS F

CLUTCH  CLUTCH SYSTEM  DETAILS  CLUTCH COVER  


CONSTRUCTION


a.

A diaphragm spring is used in the clutch cover assembly.


b.

On TMT or TMMIN made models with a 1GD-FTV or 2GD-FTV engine, a low-peak effort clutch type clutch cover assembly is used, which does not greatly affect the effort required by the driver to depress the clutch pedal even when the clutch disc is worn.


c.

On TSAM made models with 1GD-FTV or 2GD-FTV engine, a self-adjusting type clutch cover assembly is used. This clutch cover maintains a constant diaphragm spring posture regardless of the amount of clutch disc wear. Consequently, a constant clutch pedal effort is maintained to ensure a comfortable clutch feel.

Models with 2TR-FE Engine
X126754C01
1.854,0.833 2.969,1.542 true 5.021,2.396 5.844,2.708 true 1.667,0.688 1.979,0.844 0.313,0.156 10 false *1 5.885,2.625 6.198,2.781 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


TMT or TMMIN Made Models with 1GD-FTV or 2GD-FTV Engine
X126756C01
2.167,0.604 2.833,1.188 true 4.896,2.781 5.385,2.99 true 2,0.479 2.313,0.635 0.313,0.156 10 false *1 5.427,2.896 5.74,3.052 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


TSAM Made Models with 1GD-FTV or 2GD-FTV Engine
X128639C01
5.458,2.927 4.906,2.646 true 3.198,1.542 1.938,0.885 true 1.75,0.729 2.063,0.885 0.313,0.156 10 false *1 5.521,2.854 5.833,3.01 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


Models with 1KD-FTV Engine
X128640C01
1.865,0.792 3.219,1.573 true 4.969,2.656 5.469,2.917 true 1.688,0.635 2,0.792 0.313,0.156 10 false *1 5.51,2.823 5.823,2.979 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


Models with 2KD-FTV Engine
X128641C01
1.885,0.708 3.073,1.448 true 4.906,2.729 5.417,3.021 true 1.708,0.573 2.021,0.729 0.313,0.156 10 false *1 5.5,2.938 5.813,3.094 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


Models with 5L-E Engine
X128642C01
1.917,0.792 3.135,1.49 true 4.854,2.542 5.25,2.771 true 1.74,0.646 2.052,0.802 0.313,0.156 10 false *1 5.313,2.688 5.625,2.844 0.313,0.156 10 false *2
*1 Diaphragm Spring *2 Clutch Cover Assembly


i.

Low-peak Effort Clutch Type Clutch Cover

·

When the clutch disc is worn, the low-peak effort clutch type clutch cover uses the assist load of the clutch thrust cone spring to restrain increases in the effort required by the driver to depress the clutch pedal, which occur due to changes in the clutch diaphragm spring posture.

X126757C01
2.854,0.948 3.167,0.417 true 5.51,0.531 5.906,0.396 true 5.625,0.917 5.99,1 true 1.844,0.604 2.271,0.771 true 1.854,1.271 2.677,1.188 true 2.167,2.302 2.5,1.802 true 1.698,0.479 2.01,0.635 0.313,0.156 10 false *1 1.698,1.167 2.01,1.323 0.313,0.156 10 false *2 6.031,0.917 6.344,1.073 0.313,0.156 10 false *3 2.01,2.198 2.323,2.354 0.313,0.156 10 false *a 5.938,0.271 6.25,0.427 0.313,0.156 10 false *b 3.156,0.219 3.469,0.375 0.313,0.156 10 false *c
*1 Clutch Cover *2 Clutch Thrust Cone Spring
*3 Diaphragm Spring - -
*a Diaphragm Load *b Clutch Off Load
*c Assistance Load of Clutch Thrust Cone Spring - -




ii.

Self-adjusting Type Clutch Cover

·

The self-adjusting type clutch cover consists of the diaphragm spring, sensor spring, adjust ring, coil spring and pressure plate.

·

When the clutch disc wears, the pressure plate will move in the direction shown by arrow A. The height of the tip of the diaphragm spring will also increase in the direction shown by arrow B, resulting in a change in the diaphragm spring posture. This will increase the installed load of the diaphragm spring applied to the sensor spring.

·

When the installed load becomes excessive, the sensor spring will deform.

·

The clearance between the diaphragm spring and adjust ring will increase due to the deformation of the sensor spring.

X130999C01
4.958,1.573 5.5,1.302 true 5.344,3.354 5.031,3.063 true 4.656,0.875 4.344,0.583 true 4.177,0.448 4.49,0.604 0.313,0.156 10 false *1 5.385,3.271 5.698,3.427 0.313,0.156 10 false *2 5.552,1.146 5.865,1.302 0.313,0.156 10 false *3 3.042,2.219 3.354,2.375 0.313,0.156 10 false *a 4.302,1.635 4.615,1.792 0.313,0.156 10 false *a
*1 Pressure Plate *2 Diaphragm Spring
*3 Adjust Ring - -
*a Installed load applied to the sensor spring - -


·

However, the coil spring of the clutch cover will rotate the adjust ring, eliminating this clearance.

·

The diaphragm spring posture will be maintained by this mechanism, ensuring a constant pedal effort.

X131000C01
6.198,2.771 5.667,2.125 true 5.24,2.708 5.51,2.156 true 1.438,2.74 1.771,1.76 true 1.396,0.615 1.635,1.313 true 1.281,0.427 1.594,0.583 0.313,0.156 10 false *1 1.344,2.75 1.656,2.906 0.313,0.156 10 false *2 5.125,2.698 5.438,2.854 0.313,0.156 10 false *1 6.25,2.688 6.563,2.844 0.313,0.156 10 false *2
*1 Sensor Spring *2 Coil Spring