Home › Suspension › REAR SUSPENSION › REAR LOWER ARM
RM3270E _53 Suspension _041689 REAR SUSPENSION _0195324 REAR LOWER ARM A

REAR SUSPENSION  REAR LOWER ARM  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear lower arm removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced:
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
The vehicle height changes due to replacement of suspension components or after performing such operations as removal and reinstallation Headlight leveling ECU assembly initialization Headlight leveling function (Click here)


HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48231B 1.REMOVE REAR COIL SPRING LH

Hide 48730 2.REMOVE LOWER CONTROL ARM ASSEMBLY LH

a.
C334042

Remove the nut, bolt and lower control arm assembly LH.