Home › Suspension › REAR SUSPENSION › REAR LATERAL CONTROL ROD
RM3270E _53 Suspension _041689 REAR SUSPENSION _0195325 REAR LATERAL CONTROL ROD A

REAR SUSPENSION  REAR LATERAL CONTROL ROD  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear lateral control rod removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced:
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
The vehicle height changes due to replacement of suspension components or after performing such operations as removal and reinstallation Headlight leveling ECU assembly initialization Headlight leveling function (Click here)


PROCEDURE

Hide 48740 1.REMOVE REAR LATERAL CONTROL ROD ASSEMBLY

C334044

a.

Remove the bolt and nut.


b.
C334045

Remove the bolt, nut and rear lateral control rod assembly.

HINT:

While fixing the bolt in place, loosen and remove the nut.