48812
1.INSTALL REAR STABILIZER BAR
Install the rear stabilizer bar.
48818
2.INSTALL REAR STABILIZER BUSH
| *a | Bush Stopper |
| *b | Outer Side |
| *c | Front of the Vehicle |
Install the 2 rear stabilizer bushes.
Install each bush to the outer side of the bush stopper on the stabilizer bar.
Install each bush with the slit of the bush facing the front of the vehicle.
48823C
3.INSTALL REAR STABILIZER BRACKET COVER
Install the 2 rear stabilizer bracket covers with the 2 bolts and 2 nuts.
Make sure that the arrow of the bracket faces the top of the vehicle.
48840A
4.INSTALL REAR STABILIZER LINK ASSEMBLY LH
Install the rear stabilizer link assembly LH with the 2 nuts.
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud in place.
48830D
5.INSTALL REAR STABILIZER LINK ASSEMBLY RH
Use the same procedure described for the LH side.
6.INSTALL REAR WHEEL
7.PERFORM INITIALIZATION (w/ Automatic Headlight Beam Level Control System)
8.INSPECT AUTOMATIC LIGHT CONTROL SYSTEM (w/ Automatic Headlight Beam Level Control System)
9.INSPECT HEADLIGHT AIMING (w/ Automatic Headlight Beam Level Control System)