Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM3270E _52 Drivetrain _041686 AXLE AND DIFFERENTIAL _0195332 REAR AXLE SHAFT A

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 46430 3.DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.
C328794

Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly.


Hide 89546 4.DISCONNECT REAR SPEED SENSOR LH

a.
C331234

Remove the bolt and disconnect the rear speed sensor LH.


Hide 5.REMOVE REAR AXLE SHAFT WITH BACKING PLATE

a.
C328764

Remove the 4 nuts.


b.

Pull out the rear axle shaft with backing plate from the rear axle housing.


Hide 42422B 6.REMOVE REAR AXLE BEARING CASE O-RING LH

a.

Remove the rear axle bearing case O-ring LH from the axle housing.


Hide 42312C 7.REMOVE REAR AXLE SHAFT OIL SEAL LH

a.
C328766N01
1.552,2.24 2,2.021 2,2.021 2.25,2.021 false 2.323,1.938 2.781,2.135 0.458,0.198 10 false SST

Using SST, tap out the rear axle shaft oil seal LH.

SST
09308-00010  

NOTICE:

Be careful not to damage the rear axle housing hole.