Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM(for Radio and Display Type)
RM3270E _56 Audio / Visual / Telematics _041701 PARK ASSIST / MONITORING _0197848 REAR VIEW MONITOR SYSTEM(for Radio and Display Type) U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Radio and Display Type)  TERMINALS OF ECU  


CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


E320977N01
3.688,0.698 4.104,0.948 0.417,0.25 0.75,0.698 1.167,0.948 0.417,0.25 0.667,1.375 1.083,1.625 0.417,0.25 3.729,0.74 4.344,0.938 0.615,0.198 10 false G100 0.802,0.74 1.417,0.938 0.615,0.198 10 false G101 0.698,1.427 1.313,1.625 0.615,0.198 10 false G102

a.

Disconnect the G100 and G102 radio and display receiver assembly connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G100-1 (IG) - Body ground G - Body ground Power source of IG Ignition switch off Below 1 V
Ignition switch to ON 11 to 14 V
G102-3 (ACC1) - Body ground GR - Body ground Power source of ACC Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
G102-4 (+B1) - Body ground SB - Body ground Battery Always 11 to 14 V
G102-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 Ω


c.

Reconnect the G100 and G102 radio and display receiver assembly connectors.


d.

Measure the voltage and check for waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G100-2 (REV) - Body ground R - Body ground Reverse signal Ignition switch to ON, shift lever in R 7.5 to 14 V
Ignition switch to ON, shift lever not in R Below 1 V
G101-12 (V+) - G101-24 (V-) R - W Display signal Ignition switch to ON, shift lever in R Pulse generation (See waveform 1)
Ignition switch to ON, shift lever in R, screen blacked out by covering camera lens Pulse generation (See waveform 2)
G101-11 (CA+) - G101-23 (CGND) B - Shielded Power source Ignition switch ACC 5.5 to 7.05 V
G101-23 (CGND) - Body ground Shielded - Body ground Shielding Always Below 1 V


e.
E159949N05
0.196,1.018 0.531,1.162 0.335,0.144 10 GND

Using an oscilloscope, check waveform 1.

Measurement Condition
Item Content
Terminal No. (Symbol) G101-12 (V+) - G101-24 (V-)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch to ON, shift lever in R


f.
E164781N04
0.275,1.002 0.612,1.146 0.337,0.145 10 GND

Using an oscilloscope, check waveform 2.

Measurement Condition
Item Content
Terminal No. (Symbol) G101-12 (V+) - G101-24 (V-)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch to ON, shift lever in R, screen blacked out by covering camera lens