Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) › 2015.08–2016.01
RM3270E _56 Audio / Visual / Telematics _041701 PARK ASSIST / MONITORING _0197849 REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type) U

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM(for Navigation Receiver Type)  TERMINALS OF ECU  


CHECK NAVIGATION RECEIVER ASSEMBLY


E315711N01
1.656,1.135 2.156,1.385 0.5,0.25 0.5,1.906 1,2.156 0.5,0.25 3.594,1.135 4.094,1.385 0.5,0.25 1.771,1.167 2.385,1.365 0.615,0.198 10 false G42 0.625,1.948 1.24,2.146 0.615,0.198 10 false G43 3.708,1.167 4.323,1.365 0.615,0.198 10 false G41

a.

Disconnect the G41 and G43 navigation receiver assembly connectors.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G41-1 (IG) - Body ground G - Body ground Power source of IG Engine switch off Below 1 V
Engine switch on (IG) 11 to 14 V
G43-3 (ACC1) - Body ground GR - Body ground Power source of ACC Engine switch off Below 1 V
Engine switch on (ACC) 11 to 14 V*1
10.5 to 16 V*2
G43-4 (+B1) - Body ground SB - Body ground Battery Always 11 to 14 V*1
10.5 to 16 V*2
G43-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 Ω

*1: w/o Stop and Start System

*2: w/ Stop and Start System



c.

Reconnect the G41 and G43 navigation receiver assembly connectors.


d.

Measure the voltage and check for waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G41-2 (REV) - Body ground R - Body ground Reverse signal Engine switch on (IG), shift lever in R 7.5 to 14 V
Engine switch on (IG), shift lever not in R Below 1 V
G42-12 (V+) - G42-24 (V-) R - W Display signal Engine switch on (IG), shift lever in R Pulse generation (See waveform 1)
Engine switch on (IG), shift lever in R, screen blacked out by covering camera lens Pulse generation (See waveform 2)
G42-11 (CA+) - G42-23 (CGND) B - Shielded Power source Engine switch on (ACC) 5.5 to 7.05 V
G42-23 (CGND) - Body ground Shielded - Body ground Shielding Always Below 1 V


e.
E159949N05
0.196,1.018 0.531,1.162 0.335,0.144 10 GND

Using an oscilloscope, check waveform 1.

Measurement Condition
Item Content
Terminal No. (Symbol) G42-12 (V+) - G42-24 (V-)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), shift lever in R


f.
E164781N04
0.275,1.002 0.612,1.146 0.337,0.145 10 GND

Using an oscilloscope, check waveform 2.

Measurement Condition
Item Content
Terminal No. (Symbol) G42-12 (V+) - G42-24 (V-)
Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition Engine switch on (IG), shift lever in R, screen blacked out by covering camera lens