Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR
RM3270E _56 Audio / Visual / Telematics _041701 PARK ASSIST / MONITORING _0197852 ULTRASONIC SENSOR A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR  INSTALLATION  


PROCEDURE

Hide 89341A 1.INSTALL NO. 1 ULTRASONIC SENSOR

HINT:

Use the same procedure for both No. 1 ultrasonic sensors.


a.
E310921C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Attach the claw as shown in the illustration to install the No. 1 ultrasonic sensor.

NOTICE:
·

Be careful of connector direction when inserting the sensor connector.

·

Don`t damage the bumper when inserting the sensor connector.




b.

Connect the 2 connectors.

NOTICE:
·

Push the sensor perpendicularly to the bumper with the palm of the hand.

·

Pay attention not to damage the sensor.

·

Approach the wire harness connector straight to the sensor connector.



HINT:
·

When connecting the wire harness to the sonar sensor,hold the sensor from bumper surface.

·

After connecting the wire harness to the sonar sensor, push the sensor from the bumper surface.



B428650


Hide 52159 2.INSTALL REAR BUMPER COVER