Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR
RM3270E _59 Vehicle Exterior _041718 MIRROR (EXT) _0197857 OUTER REAR VIEW MIRROR G

MIRROR (EXT)  OUTER REAR VIEW MIRROR  INSPECTION  


PROCEDURE

Hide 87940 1.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH

a.

Check the operation of the mirror surface.

i.
B263446C07
1.823,2.698 1.688,2.146 true 1.823,2.979 1.917,3.198 true 1.708,2.969 1.573,3.198 true 1.469,3.219 1.76,3.375 0.292,0.156 10 false M+ 1.563,1.948 1.875,2.146 0.313,0.198 10 false MH 1.813,3.219 2.073,3.365 0.26,0.146 10 false MV 0.146,0.146 0.458,0.344 0.313,0.198 10 false *a
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


Disconnect the outer rear view mirror assembly LH connector.


ii.

Apply battery voltage and check the operation of the mirror.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 9 (MV)
Battery negative (-) → Terminal 8 (M+)
Turns upward
Battery positive (+) → Terminal 8 (M+)
Battery negative (-) → Terminal 9 (MV)
Turns downward
Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 8 (M+)
Turns left
Battery positive (+) → Terminal 8 (M+)
Battery negative (-) → Terminal 4 (MH)
Turns right


If the result is not as specified, replace the outer rear view mirror assembly LH.



b.

Check the operation of the retractable mirror.

NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.

·

The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.



i.
B263448C06
1.365,4.448 1.594,4.281 true 1.594,3.99 1.25,3.479 true 0.563,3.01 0.875,3.208 0.313,0.198 10 false *a 1.531,0.063 1.99,0.26 0.458,0.198 10 false (A) 1.135,1.01 1.594,1.208 0.458,0.198 10 false (B) 1.354,1.844 1.813,2.042 0.458,0.198 10 false (C) 1.823,2.146 2.281,2.344 0.458,0.198 10 false (D) 2.198,2.333 2.656,2.531 0.458,0.198 10 false (E) 1.021,3.333 1.333,3.531 0.313,0.198 10 false MF 1.229,4.49 1.615,4.646 0.385,0.156 10 false MR
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


Disconnect the outer rear view mirror assembly LH connector.


ii.

For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Measurement Condition Mirror Position Specified Condition
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Forward position (A) Does not move
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Position (B) Moves from (B) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Position (B) Moves from (B) to (A)
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Driving position (C) Does not move
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Position (D) Moves from (D) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Position (D) Moves from (D) to (C)
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Retracted position (E) Does not move
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Retracted position (E) Moves from (E) to (C)


If the result is not as specified, replace the outer rear view mirror assembly LH.



c.
B400491C01
1.208,1.417 0.677,1.531 true 2.646,1.531 2.229,1.427 true 0.333,0.219 0.646,0.375 0.313,0.156 10 false *a 0.333,1.458 0.792,1.656 0.458,0.198 10 false GND 2.719,1.469 3.219,1.698 0.5,0.229 10 false TRNL
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


Check the side turn signal light assembly LH.

i.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Measurement Connection Specified Condition
Battery positive (+) → Terminal 10 (TRNL)
Battery negative (-) → Terminal 6 (GND)
Side turn light illuminates


If the result is not as specified, check the side turn signal light assembly LH (Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION).

If the result is not as specified, replace the outer rear view mirror assembly LH.



d.

Check the mirror light illumination (w/ Outer Mirror Foot Light).

i.
B400491C03
1.208,1.146 0.719,1 true 2.573,1.021 2.219,1.167 true 0.333,0.219 0.646,0.375 0.313,0.156 10 false *a 0.385,0.938 0.844,1.135 0.458,0.198 10 false MLP 2.646,0.958 3.146,1.188 0.5,0.229 10 false MLP-
*a Component without harness connected
(Outer Rear View Mirror Assembly LH)


Disconnect the outer rear view mirror assembly LH connector.


ii.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Measurement Connection Specified Condition
Battery positive (+) → Terminal 1 (MLP)
Battery negative (-) → Terminal 5 (MLP-)
Mirror light illuminates


If the result is not as specified, replace the outer rear view mirror assembly LH.



Hide 87910 2.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH

a.

Check the operation of the mirror surface.

i.
B263445C09
2.021,3.198 1.823,2.99 true 1.563,3.208 1.698,2.99 true 1.823,2.719 2.302,2.417 true 0.813,1.719 1.125,1.917 0.313,0.198 10 false *a 2.354,2.333 2.667,2.531 0.313,0.198 10 false MH 1.406,3.208 1.625,3.365 0.219,0.156 10 false M+ 2.021,3.208 2.313,3.365 0.292,0.156 10 false MV
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


Disconnect the outer rear view mirror assembly RH connector.


ii.

Apply battery voltage and check the operation of the mirror.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 9 (MV)
Battery negative (-) → Terminal 8 (M+)
Turns upward
Battery positive (+) → Terminal 8 (M+)
Battery negative (-) → Terminal 9 (MV)
Turns downward
Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 8 (M+)
Turns left
Battery positive (+) → Terminal 8 (M+)
Battery negative (-) → Terminal 4 (MH)
Turns right


If the result is not as specified, replace the outer rear view mirror assembly RH.



b.

Check the operation of the retractable mirror.

NOTICE:
·

Disconnect and reconnect the battery between each mirror position check.

·

The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.



i.
B263447C07
1.583,3.958 1.292,3.479 true 1.354,4.438 1.594,4.26 true 0.646,3.135 0.958,3.333 0.313,0.198 10 false *a 1.417,0.073 1.875,0.271 0.458,0.198 10 false (A) 1.75,0.927 2.208,1.125 0.458,0.198 10 false (B) 1.573,1.76 2.031,1.958 0.458,0.198 10 false (C) 1.115,2.042 1.573,2.24 0.458,0.198 10 false (D) 0.719,2.271 1.177,2.469 0.458,0.198 10 false (E) 1.063,3.354 1.375,3.552 0.313,0.198 10 false MF 1.094,4.438 1.375,4.573 0.281,0.135 10 false MR
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


Disconnect the outer rear view mirror assembly RH connector.


ii.

For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.

OK:
Measurement Condition Mirror Position Specified Condition
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Forward position (A) Moves from (A) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Forward position (A) Does not move
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Position (B) Moves from (B) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Position (B) Moves from (B) to (A)
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Driving position (C) Moves from (C) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Driving position (C) Does not move
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Position (D) Moves from (D) to (E)
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Position (D) Moves from (D) to (C)
Battery positive (+) → Terminal 7 (MR)
Battery negative (-) → Terminal 2 (MF)
Retracted position (E) Does not move
Battery positive (+) → Terminal 2 (MF)
Battery negative (-) → Terminal 7 (MR)
Retracted position (E) Moves from (E) to (C)


If the result is not as specified, replace the outer rear view mirror assembly RH.



c.
B400491C02
1.208,1.417 0.677,1.531 true 2.646,1.531 2.229,1.427 true 0.333,0.219 0.646,0.375 0.313,0.156 10 false *a 0.333,1.458 0.792,1.656 0.458,0.198 10 false GND 2.719,1.469 3.219,1.698 0.5,0.229 10 false TRNR
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


Check the side turn signal light assembly RH.

i.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Measurement Connection Specified Condition
Battery positive (+) → Terminal 10 (TRNR)
Battery negative (-) → Terminal 6 (GND)
Side turn light illuminates


If the result is not as specified, check the side turn signal light assembly RH (Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION).

If the result is not as specified, replace the outer rear view mirror assembly RH.



d.

Check the mirror light illumination (w/Outer Mirror Foot Light).

i.
B400491C03
1.208,1.146 0.719,1 true 2.573,1.021 2.219,1.167 true 0.333,0.219 0.646,0.375 0.313,0.156 10 false *a 0.385,0.938 0.844,1.135 0.458,0.198 10 false MLP 2.646,0.958 3.146,1.188 0.5,0.229 10 false MLP-
*a Component without harness connected
(Outer Rear View Mirror Assembly RH)


Disconnect the outer rear view mirror assembly RH connector.


ii.

Apply battery voltage to the terminals of the connector, and check the illumination condition.

OK:
Measurement Connection Specified Condition
Battery positive (+) → Terminal 1 (MLP)
Battery negative (-) → Terminal 5 (MLP-)
Mirror light illuminates


If the result is not as specified, replace the outer rear view mirror assembly RH.