Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81156
1.INSTALL HEADLIGHT RIM LH
Attach the claw to install the headlight rim LH.
Install the 3 screws.
85669
2.INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING
Install a new headlight leveling motor base packing.
85662
3.INSTALL HEADLIGHT LEVELING MOTOR LH
Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.
Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.
| *a | Aiming Screw |
|
Tighten in this Direction |
|
Clockwise |
Insert the headlight leveling motor LH.
Turn the headlight leveling motor LH clockwise to install it.
For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.
Tighten the aiming screw 20 rotations.
81510C
4.INSTALL FRONT TURN SIGNAL LIGHT BULB
Install the front turn signal light bulb.
81515B
5.INSTALL FRONT TURN SIGNAL LIGHT SOCKET
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.
81510L
6.INSTALL DAYTIME RUNNING LIGHT SOCKET
Connect the connector to install the daytime running light socket.
81510J
7.INSTALL DAYTIME RUNNING LIGHT BULB
Install the daytime running light bulb.
Insert the bulb socket in to place.
|
Clockwise |
Turn the bulb socket clockwise until the bulb socket stops to install it.
81144C
8.INSTALL HEADLIGHT SOCKET COVER
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the headlight socket cover with the unlock position mark of the headlight unit, and then rotate the headlight socket cover clockwise until the lock position mark to install the headlight socket cover.
81110B
9.INSTALL NO. 1 HEADLIGHT BULB
Insert the No. 1 headlight bulb into place.
Do not touch the glass part of the No. 1 headlight bulb.
|
Clockwise |
Turn the No. 1 headlight bulb clockwise until the bulb stops to install it.