Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY LH
Attach the 4 wire harness clamps and connect the 4 connectors.
|
Connect the Seat of the Screw. |
|
Install in this Direction |
Push the headlight assembly LH backward and connect the bracket to the seat of the screw.
Be careful not to break the bracket.
Install the 3 screws and bolt.
2.INSTALL FRONT BUMPER COVER
3.ADJUST HEADLIGHT AIMING
4.ADJUST FOG LIGHT AIMING